MRF 12997 Скачать руководство пользователя страница 6

6

situations which could result in injury if not avoided.

Read and understand all safety decals before operating 
or servicing the attachment.

See the Safety Decal Location illustration in this manual 

to confirm where decals are installed on the attachment.

Safety decals which are missing, worn or faded must 
be replaced. Replacement safety decal part numbers are 
included in this manual. Contact the attachment manu-
facturer for replacement decals.

unless they have first read and understood the loader 

and the attachment operator’s or service manuals.

• 

Do not allow anyone to service the attachment 

unless they have first read and understood the safety 

and warning decals on the loader and on the attach-
ment.

• 

The attachment owner is responsible for training oth-
ers to safely service the attachment, and is responsi-
ble for any injuries or harm which occurs while the 
attachment is being serviced.

• 

Before inspecting or servicing the attachment, fol-
low the Parking Safely instructions in this manual 
and disconnect the attachment hydraulic hoses from 
the loader.

• 

Always securely block the attachment to prevent 
accidental release of the lifting mechanism when 
inspecting or servicing the attachment.

Hydraulic Fluid Safety

• 

Read and understand the hydraulic safety informa-
tion in the loader operator’s manual before operating 
or servicing the attachment.

• 

Use cardboard or a board when you check for a leak.

• 

Fluid in hydraulic hoses is under extreme pressure. 

If fluid is injected into your skin seek medical treat

-

ment immediately.

• 

Do not handle any hydraulic components until pres-
sure has been relieved from the system.

• 

Disconnect the attachment hydraulic hoses from the 
loader before inspection or service.

• 

Inspect attachment hydraulic hoses and hose shields 
for damage or wear before attaching to the loader. 

Safety Decals

Safety decals may be installed on the attachment to warn 
users of safety hazards:

• 

DANGER decals provide warnings about hazardous 
situations which will result in death or serious injury 
if not avoided.

• 

WARNING decals provide warnings about hazard-
ous situations which could result in death or serious 
injury if not avoided.

•  CAUTION decals provide warnings about hazardous 

Safety

Содержание 12997





















Отзывы: