17
9) Discharge the material from the draining port (14). After emptying the material,
please disassemble the draining valve and clean the glass part and the PTFE stopper.
10) Reinstall the draining valve.
Notice:
a) When discharging the materials, slowly turn the black stopper at the bottom of the discharge valve
counterclockwise.
b) After cleaning the glass parts, wipe the liquid on the surface with a soft clean cloth to avoid
contamination.
4
Maintenance and Management
To make sure the equipment running normally and extending its service life, users should do
daily maintenance and management. Before maintenance, please disconnect the power
supply, preparing tools, materials according to the specific requirements mentioned in this
manual. Otherwise, it will cause electric shock or cause damage to the reactor.
4.1
Management
Please follow the advices below to make sure the reactor will work normally:
1)
Check the ambient temperature and humidity regularly to ensure the machine will be
running in the proper environment.
2)
Avoid severe vibration when moving it.
3)
Please keep the reactor from impact which might cause glass broken. Inspect the
circulation hoses, if found any aged or damaged parts, please replace them immediately
refer to the original specifications.
4.2
Cleaning
1)
Before cleaning the reactor, disconnect the power cord. Otherwise, it may cause
electric shock or fire hazard.
2)
Use soft cloth to clean the surface.
3)
Please follow the instructions of the laboratory when cleaning the glassware.
4)
Avoid any leakage of dangerous substances on the reactor surface or flowing into the
reactor vessel.
