MRC PAM-9212SD, Руководство по эксплуатации

Страница: 23 / 28

2) After select the upper text to " USA " or " EURO ",
press the " Enter Button " ( 3-8, Fig. 1 ) will save the
setting function with default.
7-6 SD memory card Format
When the lower display show " Sd F "
1) Use the "
▲
Button " ( 3-5, Fig. 1 ) or "
▼
Button "
( 3-6, Fig. 1 ) to adjust the value to select the upper text to "YES " or
" no ".
YES - Intend to format the SD memory card
no - Not execute the SD memory card format
2) If select the upper to " YES ", press the " Enter Button
" ( 3-8, Fig. 1 ) once again, the Display will show text
" Ent Sd F " to confirm again, if make sure to do the
SD memory card format, then press " Enter Button "
once will format the SD memory clear all the existing
data that already saving into the SD card.
7-7 Air density
When the lower display show " dnSt "
At this time first digit of will flash,
Use the "▲ Button" (3-5, Fig. 1) or "▼ Button"
(3-6, Fig. 1) to adjust the value (Air density)
After the desired value is set, press the
"Enter Button" (3-8, Fig. 1) once will going to
Next digit adjustment (when 4 digit setting to complete)
press the "Enter Button" (3-8, fig1) once to save setting value,
then short press the "hold" button to exit setting mode.
21