MRC PAM-9212SD, Руководство по эксплуатации

Страница: 10 / 28

4. MEASURING PROCEDURE
A.Air vilocity
1) Power ON the meter by pressing and holding the " Power
Button " ( 3-2, Fig. 1 )for at least 1.5 seconds .
* Pressing the " Power Button " ( 3-2, Fig. 1 ) continuously and
> 1.5 seconds again will turn off the meter.
2) pressing and holding the " Function Button " ( 3-7, Fig. 1 ) to
Select to Air vilocity Function.
3) pressing and holding the " Unit Button " ( 3-5, Fig. 1 ) to
Select the desired Air vilocity units (m/s, Ft/min, Km/h, Knot, Mile/h)
4) Zero adjusting
pressing and holding the the "
▲
Button " ( 3-5, Fig. 1 ) and
"
▼
Button " ( 3-6, Fig. 1 ) for at least 1.5 seconds to
the display reading will show zero .
5) Pitot tube, sensing soft tube ( 3-22, Fig. 1 ) Install to
P1 Input Socket ( 3-9, Fig. 1 ),and sensing soft tube ( 3-21, Fig. 1 )
Install to P2 Input Socket ( 3-10, Fig. 1 )
6) The meter is build the two input socket ( P1 input socket,
P2 input socket) for accepting the Pitot tube sensing Air speed
input, The LCD will show the measuring Air vilocity value.
8