MRC PAM-9212SD, Руководство по эксплуатации

Страница: 15 / 28

Remark :
*
How to set the sampling time, refer to Chapter 7-2 ,
page 19 .
*
How to set the beeper sound is enable, refer to
Chapter 7-4, page 20 .
b. Pause the datalogger
During execute the Datalogger function, if press the
" LOG Button " ( 3-8, Fig. 1 ) once will pause the
Datalogger function ( stop to save the measuring data
into the memory circuit temporally ). In the same time
the " DATALOGGER " symbol will stop flashing.
Remark :
If press the " LOG Button " ( 3-8, Fig. 1 ) once again
will execute the Datalogger again, the " DATALOGGER "
symbol will flashing.
c. Finish the Datalogger
During execute the Datalogger function, press the
" LOG Button ( 3-8, Fig. 1 ) > 1.5 seconds continuously
again will finish the Datalogger function, the " DATALOGGER "
text will be disappeared and finish the Datalogger function.
5-3 Manual Datalogger ( Set sampling time = 0 second )
a. Set sampling time is to 0 second
Press the " LOG Button ( 3-8, Fig. 1 )>1.5 second, the LCD
will show the indecator " DATALOGGER " and " Position no. " symbol
then press the " LOG Button " ( 3-8, Fig. 1 ) once , the
" DATALOGGER " symbol will flashing once and Beeper will sound
once at the same time the measuring data along the time
information will be saved into the memory circuit .
13