3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
CAUTION
Ignoring the following cautions could cause injuries or property
damages.
•
Keep away the power cord from the hot plate, to prevent
melting and damages.
•
Do not touch the top plate or any object near it even when the
heater is turned off. You may get burned due to residual heat.
•
After using this equipment, make sure to turn off the main
power switch and also to disconnect the power cord from the
power outlet for the safety of other users.
•
Do not place heavy objects, including this equipment, on top
of the power cord and do not strip, scratch, bend, twist, pull, or
heat the power cord. A damaged power cord is a fire and
electrical shock hazard.
•
Make sure to set up this equipment on a flat, stable, clean,
non-slip, dry, and fireproof surface inside a lab with proper
safety measures.
•
Do not touch the power outlet, power socket, or power cord
with wet hands. And make sure to connect the power cord
directly and firmly to the power outlet and power socket.
•
Do not put or insert any objects (especially if conductive or
flammable) inside this equipment.
•
Do not expose this equipment to any heat sources including
direct sunlight.
•
Mechanical shock or vibration can damage this equipment. Pay
extra attention while moving it. Damages caused by
mechanical shock or vibration may result in injury or fire.
•
Do not impact the top plate or heat sink. You can damage the
equipment or get injured.
•
Do not install this equipment near any device that generates
high frequency noise such as high frequency welding
machines, high frequency sewing machines, or SCR power
controllers.
•
Before cleaning, make sure to unplug the power cord to avoid
electric shock or fire.
