3, Hagavish st. Israel 58817 Tel: 972 3 5595252, Fax: 972 3 5594529
•
Never disassemble, repair, or modify this equipment on your
own. Doing so will void your warranty and may result in injuries
or product damages.
•
Do not heat any substances above temperature which will
cause hazards of explosion, implosion or release of toxic or
flammable gases from the material being heated.
•
Do not use in the presence of pressurized or sealed containers.
Fire or explosion may result causing injury or death
•
The plate was calibrated as "internal mode". It is strictly
prohibited to connect an external sensor without
additional calibration. Connecting an external sensor
without additional calibration will cause serious damage to
the plate due to overheating.
•
Do not operate the plate with external temperature probe
in the air or out of the liquid or without additional
calibration.
•
The external probe must be properly placed into a liquid
on the top surface during the whole process, to prevent
damage to the ceramic plate
•
DO NOT cover ceramic plate with metal foil.
•
DO NOT use metal pots, sand bath or other insulating
material.
•
To avoid electric shock, always use a property grounded
electrical outlet of correct voltage, and correct handling
capacity equipment
