3)Read the display . The show value will indicate
correspond to the position selected. If the display
shows " ---- " it indicates an out-of-range measurement.
4)When resistance < 4
Ω
the buzzer will continuity beeper .
4-4 Watt measurement procedure
1)Rotate the function switch to the " WATT/Leakage " position.
2)Make sure your equipment work voltage, such as 110 V
or 220 V.
3)Plug in the power source to " AC POWER INPUT " terminal,
it locate the left position of Top Panel.
4)Plug in the equipment power line to the " LOAD " Terminal,
it locate the right position of Top Panel.
5)Turn on the equipment power switch.
6)It can read the Power Consumption value on the top LCD
Display. At the same time. If your equipment exist current
leakage. It will show the leakage current value on the
bottom LCD Display.
4-5 V ( voltage ) A ( current ) measurement procedures
When your equipment is on working. You can rotate the
function switch to V A Position. The upper value will show
working voltage. The bottom value will show the current
consumption value.
5. MAINTENANCE
1)The meter is intended for measuring the TRUE RMS
POWER VALUE, at the same time it also can measure the
leakage current value to verify if the measurement
equipment is under safety condition or not.
2)When measuring POWER VALUE, the working voltage
of measurement equipment must be checked before
turn on the equipment.
8
