
4. STROBOSCOPE MEASURING
PROCEDURES
4-1 Preparation and operating consideration
1) Connect the Power cable into the Power input socket
" 3-11, Fig. 1 ".
Caution :
* The power plug should be
connected to the correct AC
power supply.
2)
A " Voltage rating label " is affixed under the
bottom case to show the voltage rating of
power supply.
When use the stroboscope, make sure to identify
the power supply voltage exactly.
Plug power cable's plug into a properly grounded
AC outlet.
3) For prolong life and safety, please adhere to the
following operation duty cycle:
< 2000 RPM - 4 hours
2001 to 3600 RPM - 2 hours
3601 to 8000 RPM - 60 minutes
> 8000 RPM - 30 minutes.
* 10 min. cooling off period between cycles.
4) Do not use fingers or any tool to touch the " Xenon tube "
( 3-2, Fig. 1 )
Caution :
* Do not use fingers or any tool to touch
the " Xenon tube "
* Risk of electric shock !
8
Содержание DT-2279
Страница 10: ...3 FRONT PANEL LAYOUT DESCRIPTION Fig 1 6...
Страница 18: ...6 THE ADDRESS OF AFTER SERVICE CENTER 14...