Operation Manual
6 of 18
This instrument and the thermometer probes are sensitive instrument that can
be damaged. Always handle those devices with care.
Do not operate this instrument in an excessively wet, oily, dusty, or dirty
environment.
Never connect 24 V DC (max) voltage or Switch test terminals to voltage
generating devices.
B.
ELECTRICAL SHOCK
This instrument must be plugged into a 115V, 60Hz electric outlet only. The
power cord of the instrument is equipped with a three-pin grounding plug for
your protection against electrical shock hazards. It must be plugged directly into
a properly grounded three-pin socket. The receptacle must be installed in
accordance with local codes and ordinances. Do not use an extension cord or
adapter plug.
If supplied with user accessible fuses, always replace the fuse with one of the
same rating, voltage, and type. Always replace the power cord with an approved
cord of the correct rating and type.
If a main power supply fluctuation occurs, immediately turn off the instrument.
Power
bumps from brown-outs could damage the instrument. Wait until the
power has stabilized.
C.
CAUTIONS:
Always operate this instrument at room temperature between 15˚C-40˚C. Allow
sufficient air circulation for the instrument by leaving at least 6 inches (15cm) of
clearance around the instrument
