mr
.
steam
®
Steam@Home
®
Installation, Operation & Maintenance Manual
________________________________________________________________________
IN
S
T
A
L
L
E
R
LIQUID LEVEL CoNtroL BoArD
Explanation of LED Indicators
_________________________________________________________________________________________________
GREEN
LED is ON when there is 208/240 Volt incoming power connected, 24 Volt
transformer secondary output and on-board 5 Volt DC control power are present.
_________________________________________________________________________________________________
YELLOW
Water level indicator–LED is OFF when no water is detected (for more that 5 seconds).
ON when water level is satisfactory.
_________________________________________________________________________________________________
RED
Contactor relay indicator–LED is ON when relay is closed and sending 24 Volts to the
contactor coil. (This LED comes ON if the generator is ON.)
__________________________________________________________________________________________________
Liquid Level Control Board
PN 103975B
(shown without wiring)
10
RED
(Heater)
YELLOW
(Water Level)
GREEN
(Power)
FACTORY
WIRING
FIELD
WIRING
L E G E N D
(All Diagrams)
SteamStart™
SINGLE PHASE 208/240 VoLt WIrING DIAGrAMS
SAH units are not available in 3 phase
MODELS:
SAH3000
SAH4500
SAH6000
