Basecamp, Inc.| Portable Shower
Operating Instructions and Owner’s Manual
3
SPECIFICATIONS
UNPACKING and ASSEMBLING
1. Remove heater from carton.
2. Remove all protective material which may have been applied
to the heater for shipment.
3. Check the appliance for possible shipping damage and
straighten out all hoses to remove any kinks or twists. If any
damage is found immediately contact the manufacturer at
1-800-251-0001.
4. Install handle assembly by screwing them into place.
5. Attach the supplied regulator by rotating the t-wing nut in a
“clockwise” direction carefully not to over tighten.
6. Attach the LP cylinder to the regulator by rotating in a
“clockwise” direction. Only use LP cylinders with proper fuel
type approved for the appliance must be used. Check for gas
leaks with soapy water.
DO NOT USE A FLAME TO CHECK FOR LEAKS.
CAUTION: Certified for use only with Liquid Propane
LP-gas cylinders of the U.S. Department of Transportation (DOT) or Transport Canada, CAN/CSA B339.
Model:
XB13
(F235300)
XW18
(F235325)
Rating: BTU
10,000 -13,000
10,000 -17,000
Battery
6(D cell batteries)
Not included
2.6A/HR Sealed
Lead Acid Internal
Battery
Run Time (Full Charge)
30 minutes
40 minutes
Fuel Source
Propane
Propane
Fuel Supply Pressure
(to regulator):
Max. Bottle
Pressure
Max. Bottle
Pressure
Gas Supply Pressure
(Regulator out):
11” WC
11” WC
Electrical Input
115V, 60 Hz, 1Ø, 2A
Min. Operating
Voltage:100V
230 Watts (W)
High Temperature Control:
125°(F)
125°(F)
Temperature Rise
35°(F)
42°(F)
Ignition
Piezo Spark
Piezo Spark
DIMENSIONS
Model:
Length(in)
Width(in)
Height(in)
Weight(LBS)
XB13
12 1/2”
7 1/2”
12”
14 lbs.
XW18
19 1/4”
(Faucet to Handle)
7 1/2”
12”
15 lbs.
Model XW18
Model XB13
Pump Inlet Connection
Handle Assembly
Regulator
Assembly
Fuse
(Model XW18)
