Using your HydroGarden Elite is easy - just follow these steps
Cloche Dome Cover x 3
HydroSoil Pod x 3
Growing Pot x 3
Chalkboard Panel x 2
Growing Pot Lid x 3
Chalk Pen
Woodgrain look Panel x 2
Grow Light
Extension Arm x 2
Wick x 3 (pre-installed)
Float
Water Tank
Protector
Recess Top
Cloche Dome Cover x 3
HydroSoil Pod x 3
Growing Pot x 3
Chalkboard Panel x 2
Growing Pot Lid x 3
Chalk Pen
Woodgrain look Panel x 2
Grow Light
Extension Arm x 2
Wick x 3 (pre-installed)
Float
Water Tank
Protector
Recess Top
INCLUSIONS
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
STEP 2
STEP 6
STEP 3
STEP 7
STEP 4
STEP 8
STEP 5
HydroSoil
Pod
Cloche Dome
Cover
Growing
Pot
Protector
Seeds
Growing
Pot Lid
Water Tank
Grow Light
Extension
Arm
Water
Recess Top
Float
Step 4
Chalkboard Panel
STEP 1
Remove the protective film from the back
of the chalkboard panel and carefully
adhere it to the recess provided on
both sides of the tank. Use your chalk
pen to label the panel below each
corresponding pot. Alternatively, use the
wood finish panel to suit your decor.
Remove and discard the protector.
Squeeze the HydroSoil Pod to widen
the slit and evenly distribute your seeds.
Gently place the HydroSoil Pod into the
growing pot.
To turn your grow light on, gently tap the
touch switch located on the underside of
the grow light. Tap once for germination
and general growing. Tap twice for the
red light to help flowering and fruiting.
Insert the growing pot into the water tank.
Place the cloche covers over the pots to
assist with germination. Placing the pot
lid under the cloche cover is optional and
only recommended if seeds are sown in
the middle of the growing pot.
Once the unit is turned on, the automatic
inbuilt timer allows the grow light to
cycle through 16 hours of light and 8
hours of darkness, on both light settings.
Carefully pour water into the reservoir
until the float is level with the recess
top. Do not overfill as this will flood the
HydroSoil Pod. Note: The red marker
at the bottom of the float chamber is an
indication of low water level.
When your seeds have germinated,
remove the cloche covers. As your plants
grow, you can use the second extension
arm to raise the height of the grow light.
Assemble the grow light and an
extension arm and click onto the base as
shown. Plug adapter into a power point.
Cleaning Instructions: Remove the grow
light, extension arms, growing pots and
float for cleaning. Use warm tap water
and some mild washing liquid to clean
the water tank. Rinse thoroughly.
INDOOR GARDEN KIT
INDOOR GARDEN KIT
STEP 9
