manualshive.com logo in svg

MQ Power DCA-150SSJU, Руководство по эксплуатации и частям

Поделиться
Скачать
MQ Power DCA-150SSJU Скачать руководство пользователя страница 6

PAGE 6 — DCA-150SSJU — PARTS AND OPERATION MANUAL — REV. #3 (09/07/01)

RULES FOR SAFE OPERATION

■

NEVER

 touch the hot exhaust

manifold, muffler or cylinder. Allow
these parts to cool before servicing
engine or generator.

■

The engine of this generator requires an adequate free
flow of cooling air.  Never operate the generator in any
enclosed or narrow area where free flow of the air is
restricted. If the air flow is restricted it will cause serious
damage to the generator or engine and may cause injury
to people. The generator engine gives off DEADLY carbon
monoxide gas.

■

High Temperatures

 – Allow the engine to cool before

adding fuel or performing service and maintenance
functions. Contact with 

hot components can cause serious

burns.

CAUTION:

CAUTION:

CAUTION:

CAUTION:

CAUTION:

Failure to follow instructions in this manual

may lead to serious injury or even death!

This equipment is to be operated by
trained and qualified personnel only! This
equipment is for industrial use only.

The following safety guidelines should always be used when
operating the DCA-150SSJU  portable generator:

GENERAL SAFETY

■

DO NOT 

operate or service this equipment before

reading this entire manual.

■

This equipment should not be operated by
persons under 18 years of age.

■

NEVER

 operate this equipment without proper

protective clothing, shatterproof glasses,
steel-toed boots and other protective devices
required by the job.

■

NEVER

 operate this equipment when not feeling

well due to fatigue, illness or  taking  medicine.

■

NEVER

 operate this equipment under the

influence or drugs or alcohol.

■

NEVER

 use accessories or attachments,

which are not recommended by MQ Power for this
equipment. Damage to the equipment and/or injury to user
may result.

■

Manufacturer does not assume responsibility for any
accident due to equipment modifications.

■

Whenever necessary, replace nameplate, operation and
safety decals when they become difficult read.

■

Always check the machine for loosened  threads or bolts
before starting.

CAUTION

CAUTION

CAUTION

CAUTION

CAUTION

:

■

Always use extreme caution when

working with 

flammable

 liquids. When

refueling, 

stop the engine

 and allow it to

cool. 

DO NOT

 smoke around or near the

machine. Fire or explosion could result
from fuel vapors, or if fuel is spilled on a
hot engine.

■

NEVER

 operate the generator in an explosive atmosphere

or near combustible materials. An explosion or fire could
result causing severe 

bodily harm or even death.

■

Topping-off to filler port is dangerous, as it tends to spill
fuel.

Always refuel in a well-ventilated area,
away from sparks and open flames.

Содержание DCA-150SSJU





































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды