MQ Multiquip Mikasa MT76D Скачать руководство пользователя страница 54 | Manualshive

Страница: 54 / 54

background image

OPERATION AND PARTS MANUAL

Your Local Dealer is:

HERE’S HOW TO GET HELP

PLEASE HAVE THE MODEL AND SERIAL

NUMBER ON-HAND

WHEN CALLING

UNITED STATES

Multiquip Corporate Offi ce

MQ Parts Department

18910 Wilmington Ave.

Carson, CA 90746

Contact : [email protected]

Tel. (800) 421-1244

Fax (310) 537-3927

800-427-1244

310-537-3700

Fax: 800-672-7877

Fax: 310-637-3284

Service Department

Warranty Department

800-421-1244

310-537-3700

Fax: 310-537-4259

800-421-1244

310-537-3700

Fax: 310-943-2249

Technical Assistance

800-478-1244

Fax: 310-943-2238

CANADA

UNITED KINGDOM

Multiquip

Multiquip (UK) Limited Head Offi ce

4110 Industriel Boul.

Laval, Quebec, Canada H7L 6V3

Contact : [email protected]

Tel: (450) 625-2244

Tel: (877) 963-4411

Fax: (450) 625-8664

Unit 2, Northpoint Industrial Estate,

Globe Lane,

Dukinfi eld, Cheshire SK16 4UJ

Contact : [email protected]

Tel: 0161 339 2223

Fax: 0161 339 3226

© COPYRIGHT 2016, MULTIQUIP INC.

Multiquip Inc , the MQ logo and the Mikasa logo are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks
are the property of their respective owners and used with permission.

This manual MUST accompany the equipment at all times. This manual is considered a permanent part of the equipment and should remain with the unit if resold.

The information and specifi cations included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in
this manual are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifi cations, design or the information published
in this publication at any time without notice and without incurring any obligations.

«
...
52
53
54

Содержание Mikasa MT76D























































Отзывы:

Нет отзывов

Похожие инструкции для Mikasa MT76D

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды