background image

Your Local Dealer is:

HERE’S HOW TO GET HELP

PLEASE HAVE THE MODEL AND SERIAL

NUMBER ON-HAND

 

WHEN CALLING

 UNITED STATES 

 Multiquip Inc.

(310) 537- 3700 

6141 Katella Avenue Suite 200

Cypress, CA  90630 

 E-MAIL: [email protected]

WEBSITE: www.multiquip.com

CANADA

 

UNITED KINGDOM  

Multiquip

Multiquip (UK) Limited Head Offi ce 

(450) 625-2244 

4110 Industriel Boul.

Laval, Quebec, Canada H7L 6V3

 E-MAIL :  [email protected] 

0161 339 2223 

Unit 2, Northpoint Industrial Estate, 

Globe Lane,

Dukinfi eld, Cheshire SK16 4UJ

 E-MAIL :  [email protected]

© COPYRIGHT 2019, MULTIQUIP INC.

Multiquip Inc  and the MQ logo         are registered trademarks of Multiquip Inc. and may not be used, reproduced, or altered without written permission. All other trademarks are the property 
of their respective owners and used with permission. 

The information and specifi cations included in this publication were in effect at the time of approval for printing. Illustrations, descriptions, references and technical data contained in 
this document are for guidance only and may not be considered as binding. Multiquip Inc. reserves the right to discontinue or change specifi cations, design or the information published 
in this publication at any time without notice and without incurring any obligations.

  

Service Bulletin

 

Electric Walk-Behind Trowel 230V Wiring Update

Содержание J36E2











Отзывы: