© 2018 mPTech. All rights reserved.
Halo MINI 2 - EN
15
12
<Contacts> /
<Back> button
While on the main screen enables entering into the
phonebook [Contacts]. While in the menu you can exit
or opt out.
13
<Green headset>
button
Allows you to receive an incoming call. In the standby
mode allows to view the call list.
14
<Red handset>
button
Allows you to reject an incoming call. While in the
menu allows you to return to the main screen. While
in the standby mode it allows to turn off the display
and, if pressed longer, turn it off or on again.
15
Buttons <Up>
and <Down>
While in menu enables navigating around the menu.
On the main screen <Up> calls the alarm/clock,
<Down> calls up sound profiles.
16
Phone keypad
Keys enabling dialling the phone number in the home
screen, and entering the letters and numbers of the
message body in the SMS writing mode.
17
<*> button
On the main screen, held for two seconds, it locks or
unlocks the keypad. When writing an SMS, it displays
symbols for insertion into the content. In the radio
application, it allows you to decrease the volume.
18
Microphone
Do not cover it with your hand while on the phone.
19
MicroUSB port
When connected, the charger enables recharging the
battery.
20
Power supply
Allows you to charge the battery in the docking
station.
21
<*> button
While on the home screen allows you to switch sound
profiles of the phone When writing an SMS, it
switches character input modes. The radio application
allows you to increase the volume.
Turning the phone on/off
To turn the phone on/off press and hold the <red handset> button.
If directly
after turning the phone on you will see the code request, (in form of “****”) type
the code and press <OK>.
Installation of the SIM card and the battery
If the phone is switched on - switch it off. Slide the rear cover flap away from the
rough area in the direction of the lower brink of the phone. Take the battery out.
Insert the SIM card - SIM card must be placed in a slot, according to the
embossment in the phone. Insert the battery - the battery should be placed so
that its three gold contacts touch the triple connector in the phone bay. Gently
replace the battery cover by sliding it back into place.
Charging the battery
Plug the USB cable into a suitable charger socket and the microUSB plug into the
microUSB cable socket on your phone and plug the charger into a power outlet.
You can also connect the microUSB plug of the microUSB cable to the microUSB
socket in the charging base and place your phone in it so that the connectors
(20) in the phone come into contact with the connectors in the base.
