MPS M.C. Rexx QD2000 Series, Используйте руководство по уходу и запасным частям, Страница: 14 / 54

14
OPERATING INSTRUCTIONS
Cu
st
om
er
Su
pp
or
t
M
ain
tenanc
e
O
pe
ra
tin
g I
ns
tr
uc
tio
ns
Tr
ou
bl
es
ho
ot
in
g
Sa
fe
ty
In
st
ru
ct
io
ns
As
se
m
bl
y
To engage the total lock casters, simply press down on the locking tab with
your toe on all four casters. This will prevent any movement of the caster
(rolling or swiveling). The rubber wheel gives good traction on most floor
surfaces.
To release the casters and allow mobility of the bed, press down on the
release lever to unlock each caster.
Total Lock Casters
LOCKED CASTER
UNLOCKED CASTER
WARNING!
When the bed is not being moved, the casters should always be locked. After
applying the brakes test the motion of the bed to ensure that the brakes are properly engaged.
Patients tend to use the bed for support when getting in or out of bed, and could be injured if the
bed unexpectedly moves sideways.
www.mchealthcare.com
Transporting Bed
T
he M. C. Rexx
bed is designed for mobility at any height. Use the Foot Board to move the bed. Never use
Side Rails, Assist Rails or other accessories to move the bed.
To prevent any damage or injury, it is recommended that two Personnel be present when moving a bed.
1 The Power Cord is unplugged and the cord is safely stored off the floor .
2 All the head and foot brakes are released.
3 All accessories used on the bed are secured or removed.
Before moving the bed you should check all around the perimeter of the bed to ensure that no accessories will fall or
get damaged and that:
WARNING!
Do not roll the bed over high thresholds with the patient in the bed.
Directional Lock Hinge
Patients tend to use the bed for support when getting in or out of bed.
Patients could be injured if the bed moves sideways, to guard against
this risk you must engage the "Directional Lock Hinges". Simply flip the
U-shaped tab down with your toe over both casters. This will prevent
any lateral movement (swiveling) of the caster. To release the casters and
allow full mobility of the bed, gently flip the U-shaped tab over the square
leg tube for each caster.
The Total Floor Lock is engaged by simply stepping with the ball of your
foot on the Red end of the Pedal located on the Foot and/or Head ends
of bed - as illustrated. This will immobilize the Foot and/or Head ends of
the bed.
To make the bed mobile again, unlock the Total Floor Lock by stepping
on the green end of the Pedal.
Total Floor Lock
LOCKED
UNLOCKED
RED
LOCKED POSITION
GREEN