MPM MRK-05, Руководство пользователя

Страница: 12 / 36

12
GB
Insert the plug into the power outlet.
In order to start the appliance press and hold down the switch (4) or (5).
Put the products to be cut into the food chute (14). You can lightly push them with the pusher
or cut into smaller pieces earlier on, if necessary.
In order to detach the blender from the lid, push the lock release (3) and pull it out.
In order to open the lid (13) push the lock release button (12) and turn the lid home, coun-
ter-clockwise (fig. 2)
To disassemble the cutting attachment reverse the assembly procedure.
The MRK-05 food processor is provided with additional stainless steel mixing attachment,
designed for work in high temperatures (2), container with a lid, 400 ml, (19) with stainless
steel chopping and grinding knife (20), additional container with a lid, 600 ml (22), whisking
attachment (21) and dough hook (23).
ASSEMBLY OF THE CUTTING ATTACHMENT
Fix the mixing attachment (2) to the blender housing (1). The mixing attachment gets blocked
the moment it is pushed into the blender housing (1). To remove the mixing attachment (2),
push the lock release buttons (3) and remove it, keeping the blade downward. Make sure to
avoid cutting yourself while removing the attachment and damaging any part.
CHOPPING KNIFE ASSEMBLY
Place the container (19) on a dry and firm surface. Remove the lid from the container (19). Then
put the cutting knife (20) on the pin in the centre of the container bottom and close the con-
tainer so that the tip of the cutting knife (20) fits into the lid. Make sure every part is correctly
fixed and replace the blender housing (1) on the mounting socket in the cover. Insert the plug
into the power outlet.
In order to start the appliance press and hold down the switch (4) or (5).
ASSEMBLY OF CUTTING DISCS
Place the container (11) on a dry and firm surface. Remove the lid (13) from the container (11) by
pressing the lock release button (12) on the handle (11) and turn the lid home, counter-clock-
wise (fig 2). Next put the discs pin (18) on the bolt in the centre of the container bottom, place
one of the discs (16, 17) on the pin (18) and close the container in such a way that the tip of
the discs (16) (17) fits into the lid (13). Pay attention to the marks on the container lid and
handle (fig. 2). Follow the steps of fixing the lid in the ASSEMBLY OF THE DICING ATTACHMENT
section.
ASSEMBLY OF THE DOUGH HOOK
Place the container (11) on a dry and firm surface.
Remove the lid (13) from the container (11) by pushing the lock release button (12) and turn the
lid home, counter-clockwise (fig. 2).