Electrical connections
The network voltage shall correspond to the voltage indicated at the plate placed
inside the hood. If the hood is equipped with a plug, insert it into the socket
complying with the applicable requirements, and located in the easily accessible
place. If the hood is not equipped with a plug, the hood installations shall be
performed by a person having the required authorizations (such as electrician).
Cleaning and maintenance
Before performance of any actions related to the device maintenance,
disconnect the plug from the socket, or turn the safety lever off. The hood shall
be cleaned with delicate detergents, do not use the abrasive detergents. The
regular maintenance enhances significantly the hood operation quality and
service life. The hood cleaning shall be performed at least monthly, or every 35
hours of hood operation.
DO NOT EVER USE ANY ALCOHOL-BASED
DETERGENTS FOR HOOD CLEANING.
The satin (inox) elements shall
be cleaned with special liquids.
NOTE:
The failure to comply with the instructions concerning the device
cleaning and filters replacement, may cause a risk of fire. It is
recommended therefore to comply with these requirements. The
manufacturers is not liable for any damages of a motor or fire
caused by incorrect operation.
Fat filter
The hood is equipped with aluminium filter stopping the particles of fat emitted
in course of cooking. To remove the filter, move the clamps in the direction of
arrows (Fig.6). The filter shall be cleaned manually by its immersion into the
water with dish washing liquid for approx. 15 minutes, under the temperature
equal to 40-50ºC. After 15 minutes, wash and accurately rinse the filter. The
filter must be dry before its installation in the hood. It is also possible to wash
the filter in the dish washing machines. In course of washing, the filter colour
may change, which does not influence its filtering characteristics. The failure to
