MPM MPM-12-KPO-10, Руководство пользователя, Страница: 20 / 56

20
EN
APPLIANCE ASSEMBLY
1.
Put two 1.5V AAA batteries in the remote
control (19).
CAUTION! The batteries are not included with the
MPM-12-KPO-10 air conditioner.
2.
Pull out the outer rims at both ends of the
hot air exhaust duct (14), so that the equip-
ment can be easily screwed together
(Fig. 1).
3.
Screw the mounting ring (15) on one end
of the duct (14) in a counter-clockwise di-
rection. The three prongs on the outer
edge of the ring (15) must be on the out-
side of the duct (Fig. 2). Screw the external
connector (16) on the other end of the
duct (14) in a counter-clockwise direction.
CAUTION! Carefully screw the elements together, gradually increasing pres-
sure so as not to damage them. Screw the ring and the connector on the duct
by turning them at least three times.
4.
Insert the mounting ring (15) together with the duct (14) into
the air outlet (6) and gently turn the ring counter-clockwise
(Fig. 3).
5.
Put the air conditioner in place, providing at least 50 cm of free
space around the appliance (Fig. 4).
6.
The external connector (16) at the other end of the duct (14)
should be mounted in the window using the included mount-
ing kit. You can use one of two types of mounting kits: for
hinged and sliding windows.
Fig. 1
Fig. 2
Fig. 3
Fig. 4