MPM MOD-34, Руководство пользователя

Страница: 10 / 24

10
EN
BEFORE FIRST USE
1.
Remove the vacuum cleaner from the cardboard box. Remove all stickers, shipping locks,
plastic bags, and fi lling material.
2.
Inspect the vacuum cleaner carefully for damage which may have occurred in transport. If
damage is suspected, consult your reseller.
3.
Assemble the vacuum cleaner (see Section “ASSEMBLING THE VACUUM CLEANER”).
4.
Verify that your power mains match the nameplate ratings of the vacuum cleaner.
ASSEMBLY AND DISASSEMBLY
1.
Press the hinged cover release
⑥
and swing open the cover
⑤
at the dust canister
④
bottom.
2.
Insert the EPA filter
⑦
into the dust canister and secure: align the three bosses on the filter
with the three slots within the dust canister and rotate the filter clockwise until locked.
3.
Insert the filter cage
⑧
into the dust canister and secure: align the three bosses on the filter
cage with the three slots within the dust canister and rotate the filter cage clockwise until
locked.
4.
Close the hinged cover
⑤
to lock.
5.
The removal of the filter and its cage is done by releasing both with a counter-clockwise
rotation and reversing the assembly procedure.
6.
Attach the telescopic wand
⑫
to the wand port
⑨
and the tool you require (
⑬
,
⑭
or
⑮
).
USING THE APPLIANCE
1.
Make sure that the vacuum cleaner has been properly assembled and with filters in place.
2.
Choose the best tool for vacuum cleaning the specific surface. Optimum vacuum cleaning
efficiency is achieved by using the tools as follows:
- Hard floor & carpet tool
⑬
: use it to clean carpets, rugs, and hard floors (like tiles or terrazzo).
- Slot tool
⑮
: use it to clean narrow spaces.
- Small multifunctional brush
⑭
: use it to clean curtains, upholstery, clothing, furniture or
window blinds.
3.
Plug the power cord into a mains outlet and start the vacuum cleaner with the power
switch
②
.
CAUTION! This appliance is intended for cleaning of dry surfaces only!
4.
Monitor the dust canister
④
level. When it is full, stop vacuum cleaning and empty the dust
canister. Working with the dust canister overfilled reduces the vacuum cleaner’s perfor-
mance (the centrifugal force, which expels dust dirt into the duct canister, is reduced) and
the filters become clogged too fast.
5.
If the suction power drops noticeably during vacuum cleaning and the dust canister is emp-
ty, immediately check the wand and the attached tool for obstruction.
6.
You can also attach the tools directly to the motor unit’s mouth. This makes the vacuum
cleaner more compact to clean places which are hard to reach
Fig. 1 .
7.
When done, turn off the vacuum cleaner with the power switch
②
and unplug the power
cord from the mains.