MPM MOD-25, Руководство пользователя

Страница: 11 / 28

11
EN
1.
Vacuum cleaner canister
2.
Power cord winding button & carrying
handle
3.
Power switch with suction power
control
4.
Cyclone chamber & dust canister
release latch
5.
Cyclone chamber & dust canister seat
6.
Suction hose connection opening
7.
Power cord
8.
Grill release latches
9.
Cyclone chamber & dust canister
10.
Dust canister handle
11.
Cyclone chamber & dust canister lid
release latch
12.
Cyclone chamber & dust canister lid
13.
Cyclone chamber cone prefilter
14.
Motor sponge filter
15.
Motor HEPA filter
16.
Air discharge HEPA filter
17.
Air discharge filter grill
18.
Metal telescopic wand
19.
Suction hose
20.
Suction hose mounting ring
21.
Suction hose handle
22.
Floor and carpet tool
23.
Parquet brush tool
24.
Small turbo-brush
25.
Slide-out crevice tool
26.
Small multifunctional brush with
adapter
27.
Accessories holder
28.
Vacuum cleaner wheels
STATIC ELECTRICITY
Vacuum cleaning certain surfaces at a low air humidity may cause slight electrification of the
appliance. This is natural, does not damage the appliance and does not constitute its defect.
To minimise this phenomenon, it is recommended to:

frequently discharge the appliance by touching items in the room with the metal pipe,
 increase air humidity in the room,

use generally available anti-electrostatic products.
APPLIANCE ASSEMBLY
1.
Remove the vacuum cleaner from the box and discard all bags, stickers and fillers.
2.
Check that the cyclone chamber, the dust canister and all filters are properly installed in
place. See the installation and removal instructions in Sections: “EMPTYING THE DUST CON-
TAINER” and “AIR FILTER CLEANING AND REPLACEMENT”.
3.
Press and hold the latch on the suction hose mounting ring
⑳
, insert the ring into the open-
ing
⑥
and release the latch. To disassemble, press and hold the latch again and remove the
ring
⑳
from the opening
⑥
.
4.
Connect the other side of the suction hose
⑲
to the handle  and connect the metal tele-
scopic wand
⑱
to the other side. Install one of the tools,  ,  , or  , on the end of the wand.
USING THE APPLIANCE
1.
Before turning on the vacuum cleaner, unwind the power cord
⑦
to a suitable length and
plug it into a mains outlet. The yellow mark on the power cord indicates the optimum length
limit. Do not pull out the power cord beyond the red mark! Do not press the vacuum cleaner
handle
②
when unwinding the power cord. When folded down, the handle
②
is the power
cord winder button.
2.
Press the power switch
③
to turn on the vacuum cleaner.