MPM MGO-32, Руководство пользователя

Страница: 13 / 28

13
GB
USING THE WAFFLE MAKER
CAUTION! The heat plates of the waffle maker become very hot during use! Touch the handle only! Do not touch
the batter fill port
❼
.
CAUTION! Hot steam will come out when opening the waffle maker.
1.
Make the batter for the waffles.
2.
Make sure that the waffle maker is standing with the stand
❸
extended as shown in this
manual.
3.
Release the latch
❾
and open the top lid
❶
. Spread butter or other edible fat thin on the the
heat plates
❽
. Close the top lid.
4.
Plug the waffle maker to a mains outlet. The red indicator lamp
❹
will go on and the waffle
maker will start heating up. Set the thermostat knob
❻
to MAX. This way the heat plates will
heat up faster.
5.
When the waffle maker reaches the operating temperature, the green indicator light
❺
will
go on. Bake the waffles at approx. 220°C. The MIN mark on the thermostat knob is a temper-
ature of the heat plates at approx. 170°C; the MAX mark is a temperature of approx. 230°C.
6.
Fill the measuring cup with the batter and pour the contents carefully into the batter fill
port
❼
. Be careful not to overfill the waffle maker or spill the batter. If you spill the batter
over the waffle maker, unplug the waffle maker from the mains, wait for the appliance to cool
down, and clean it thoroughly.
7.
Baking the waffles may take from 6 to 10 minutes. When the waffle maker is powered on,
the indicator lamp
❺
will go on and off. This means that the waffle maker is periodically
heating up the plates to hold the temperature. Check the waffles during baking: release the
latch
❾
and carefully lift the top lid ajar. If the waffles require more baking, close the top lid
and secure the latch. Adjust the baking temperature according to the desired doneness and
browning of the waffles.
8.
When the waffles are done, unlock and open the top lid and remove the waffles with a wood-
en spatula. Do not leave any baked batter residues on the heat plates, especially near the
batter fill port.
CAUTION! Do not use metal or sharp cutlery as it may damage the heat plate surface!
9.
Close and latch the top lid and pour in the batter if you want to make more waffles.
10.
Once finished baking, unplug the power cord from the mains outlet and put the waffle mak-
er aside until it cools down completely. Next, thoroughly clean the waffle maker.
CLEANING AND MAINTENANCE
1.
Prior to commencing the cleaning (and after finishing the roasting), pull out the plug from
the plug socket and allow the appliance to cool completely.
2.
Thoroughly wipe the heating panels, clean the roaster edges using soft cloth or towel.
3.
If complete removal of any food residuals from the surface of heating panels is problematic,
pour some edible onto dirty surface and try to clean after about 5 minutes. Your efforts will
be successful this time.
4.
Wipe the external surface of the roaster using wet cloth.
5.
Measuring cup
❸
with lukewarm water and a detergent, rinse clean with water, and leave
to dry.