30
EN
REMOTE CONTROL
Fi g. 22
1.
Holding the product on-off
2.
Infrared eye
3.
Infrared eye
4.
Increasing the power level of the fan
5.
Decreasing the power level of the fan
6.
Switching the lighting on/off
7.
Mounting kit for attaching the remote
controller to the workbench
REPLACING THE LAMPS
It indicates the maximum power consumption of the lamp.
A lamp with same power rating should be used when
replacing the lamp.
To find out the power rating used in the product, see the
rating label in the product.
Push on the lamp with your hand, to remove it.
Separate the self adhesive tape around the lamps and the
body plate from each other.
Before placing the new LED lamp, remove the protective
folio from the frame, and then stick it on its place on the
body of the product.
max 1 W
Fi g. 23
MPM-63-OWS-01_instrukcja_v04.indd 30
MPM-63-OWS-01_instrukcja_v04.indd 30
23.08.2022 12:03:42
23.08.2022 12:03:42
