MPL PIP19, Техническое справочное руководство

Страница: 33 / 56

3.5.2 INTERNAL CONNECTORS
3.5.2.1 IDE Connector (J41)
Standard 44 pin 2 mm IDE pin out.
Pin Signal Description Pin Signal Description Pin Assignment
1 /RESET Reset 2 GND Ground
3 DD7 Data bit 7 4 DD8 Data bit 8
5 DD6 Data bit 6 6 DD9 Data bit 9
7 DD5 Data bit 5 8 DD10 Data bit 10
9 DD4 Data bit 4 10 DD11 Data bit 11
11 DD3 Data bit 3 12 DD12 Data bit 12
13 DD2 Data bit 2 14 DD13 Data bit 13
15 DD1 Data bit 1 16 DD14 Data bit 14
17 DD0 Data bit 0 18 DD15 Data bit 15
19 GND Ground 20 KEY Not connected (key pin)
21 DMARQ DMA request 22 GND Ground
23 /DIOW I/O write strobe 24 GND Ground
25 /DIOR I/O read strobe 26 GND Ground
27 IORDY I/O ready 28 CSEL Cable select
29 /DMACK DMA acknowledge 30 GND Ground
31 INTRQ Interrupt request 32 IOCS16 Not connected (obsolete)
33 DA1 Address 1 34 /CBLID Cable Identifier
35 DA0 Address 0 36 DA2 Address 2
37 /CS0 Chip select 0 38 /CS1 Chip select 1
39 /DASP Activity LED 40 GND Ground
41 VCC +5 V 42 VCC +5 V
43 GND Ground 44 RES Not Connected (reserved)
1 43
2 44
Figure 28: IDE Connector (Samtec,
TMM122-01-LDSM)
3.5.2.2 SATA Signal Connectors (J56, J57)
Standard 7 pin SATA connector.
Pin Signal Description Pin Assignment
1 GND Ground
2 A+
3 A-
Differential signal pair A from PHY
4 GND Ground
5 B-
6 B+
Differential signal pair B from PHY
7 GND Ground
7
1
Figure 29: SATA Connector (Molex, 67491-0010)
3.5.2.3 SATA Power Connector (J54)
10 pin 2.54 mm Header.
Pin Signal Description
1 +5V 5 V Power
2 +5V 5 V Power
3 +5V 5 V Power
4 GND Ground
5 GND Ground
6 GND Ground
7 GND Ground
8 +3.3V 3.3 V Power
9 +3.3V 3.3 V Power
10 +3.3V 3.3 V Power
Pin Assignment
1
5
6
10
Figure 30: Power Connector For SATA Devices
(Samtec, IPL1-105-02-S-D)

2012 by MPL AG 33 MEH-10126-201 Rev. F
High-Tech • Made in Switzerland
PIP19 / PIP20 / PIP22 / PIP23
Technical Reference Manual