72
Disconnecting the USB Connection
It is recommended that you follow these directions for separating the device from the PC safely. If
these instructions are not followed, it may result in data damage or product malfunction.
Windows 98 / 98SE Users
There is no Safely Remove Hardware command in Windows 98 / 98SE. The user must wait until the
file/data transfer is complete, and then disconnect the 24PIN USB Multi-Cable.
1
Place mouse cursor on
Stop a Hardware Device
icon
in the system tray, and click right mouse button.
2
Select
Stop USB Mass Storage Device
.
3
Select USB Mass Storage Device from the list of
hardware, and click the
Stop
button. When the
Stop a Hardware Device
window appears,
select MPIO HD400 USB Device. Then, click the
OK
button and disconnect the 24PIN USB Multi-Cable.
Note
In Windows 2000, disconnect the 24PIN USB Multi-Cable by clicking the [OK] button after the “Safely
Remove Hardware” message appears. In Windows XP, disconnect the 24PIN USB Multi-Cable after the
“Safely Remove Hardware” message appears.
Using a Removable Disk
Click
Click
Click
