3.
Assembly, drawings
3.1
Assembling instructions
The environmental atmosphere must be free of aggressive dust, corrosive vapours, gases and
liquids. The generator is to be protected against moisture according to IP 55.
Synchronous generators with integrated electronics may not be operated in areas classified
as dangerous, unless they are installed and certified in an approved housing.
The generators are designed for foot assembly.
Make sure that the heat produced by the generator can be dissipated. The ventilator screen must always be kept free,
in order to ensure an adequate supply of fresh air.
All heat sources must be considered when determining the ambient temperature, so that the temperature does not
rise above the permissible maximum value for the generator.
3.2
Connections
1
Protective conductor connection
Magnet connection
Connection for control cable to the MFA
1
2
3
Fig. 3 | Connection box T4002 13 kW and 20 kW
Control electronics
2
1
3
Fig. 4 | Connection box T4002 30 kW
1
2
3
www.mozelt.com
CAUTION
Englisch
MOZELT GmbH & Co. KG
Load lifting magnet devices
Technical Manual:
Electrical Power Supply T4002
Copyright:
MOZELT GmbH & Co. KG, D-47269 Duisburg
Edition: May 2012
-6-
