8
Adapter (accessory)
There is a 1/4" extension screw hole
on the top of the adapter, and it
comes with a 1/4” to 3/8”
adapter
screw to meet different shooting
devices.
Arca-Swiss Quick Release
There is a 1/4” screw hole and a 3/8”
screw hole on the body of Arca-Swiss
quick release which can meet various
extension needs. (When connecting the
body with monopod or tripod via the
Arca-Swiss quick release, the Slypod E
can be used as a motorized slider)
Tripod
There is a 1/4" extension screw on top of the tripod, which can be used for support and
extension, the tripod can be used as a handle when the legs are not open. (The main
body must be connected to the stand adapter to connect the tripod)
Stand Adapter
There are 1/4" extension screw holes on the stand
adapter which enable the body to connect with
tripod or other accessories to mount different
shooting devices.
Mounting
Mounting the adapter
Push the quick mounting port
from the bottom of the
adapter into the groove at the top of the pole until
fully fit. After connected, tighten the knob
clockwise to
secure the adapter onto the pole; Turn counter-clockwise
to loosen the knob
, then turn the knob
counter-
clockwise to detach the adapter from the pole. Reset the
quick release knob after the adapter is detached.