12
Segmentation Mode
Select the segmentation mode, add a path (Click to add the path. 5 paths is the most
that can be added, click confirm before adding the next path).Slide the S operating point
and the E operating point to any position to set the starting position and end position of
the first path. Slide the E operating point to set the end position of the second, third,
fourth or fifth path. Then, the starting point of the next path will be the end position of
the previous one.
Click
to confirm the path and set the running time. The next path can be added after
confirming the path. Click Confirm and the Slypod E will run according to the setting
after the countdown is over. At this point, enter the Segmentation time-lapse interface,
click on the red circular area, the Slypod E can control the camera to take pictures.
(Slypod E needs to be connected to the camera with the camera control cable)
Click to
delete
the
path
Click to
reset the
path
Click to add
the path
Path
number
S operation
point
E operation
point
Tap to the red
area to set the
running time
Tap to the red
area to set the
running time
End (number
shows the
distance from
the origin)
Click to confirm the
path before adding
the next path.
Click to start