TN-5518 Series
Panel/Wall Mounting
1:
Mounting the TN-5516/5518 to a wall requires 4 screws. Use the
Net switch as a guide to mark the correct positions of the 4 screws.
2:
he 4 screws in the panel mounting kit. If you
ld like to use your own screws, make sure the
screw head is between 6.0 mm and 7.0 mm in
ameter and the shaft is less than 4.0 mm in
meter, as shown at the right.
ew the screws in all the way—leave a space of about 2 mm to
allow room for sliding the ToughNet switch between the wall and the
ws.
STEP
Tough
STEP
Use t
6.0 - 7.0 mm
< 4.0 mm
wou
di
dia
Do not scr
scre
- 8 -
