Moxa Technologies Smartio CP-168U, Руководство пользователя

Страница: 65 / 86

Software Installation
Smartio
CP-168U User’s Manual 3-49
5. You can use Moxa diagnostic utility to verify the driver status.
# cd /moxa/mxser/utility/diag
# ./msdiag
== MOXA Smartio/Industio Family Multiport Board Status Utility(1.1) ==
Tty Device Major Number= 30.
Callout device Major Number= 35.
Board 1 : CP-168U series (BusNo=2, DevNo=13)
Port 1: 0xac00, max. baud rate = 230400 bps.
Port 2: 0xac08, max. baud rate = 230400 bps.
Port 3: 0xac10, max. baud rate = 230400 bps.
Port 4: 0xac18, max. baud rate = 230400 bps.
Port 5: 0xac20, max. baud rate = 230400 bps.
Port 6: 0xac28, max. baud rate = 230400 bps.
Port 7: 0xac30, max. baud rate = 230400 bps.
Port 8: 0xac38, max. baud rate = 230400 bps.
6. You can use Moxa terminal utility to test tty port.
# cd /moxa/mxser/utiltiy/term
# ./msterm
SCO
The SCO driver for MOXA’s multiport serial boards supports the following products:
!
Universal PCI Boards: CP-168U, CP-104UL, CP-104JU
!
PCI Boards: C168H/PCI, C104H/PCI, C104HS/PCI
!
ISA Boards: C168H, C168HS, C168P, C104H, C104HS, C104P, CI-104J, CI-104JS
Follow the steps below to install the driver under SCO. Moxa provide the following SCO
Version:
!
SCO OpenServer
!
SCO UnixWare 7
!
SCO UnixWare 2.1
The following steps are using CP-168U under SCO OpenServer as an example. If you
want to install under SCO UnixWare 7 or SCO UnixWare 2.1 , the installation procedures