PT-7728 User’s Manual
Featured Functions
3-14
Trunk Table
Setting
Description
Trunk group
Displays the trunk type and trunk group.
Member port
Displays the member ports that belong to the trunk group.
Status
Success
means port trunking is working properly.
Fail
means port trunking is not working properly.
Standby
means port trunking is working as a standby port. When there
are more than eight ports trunked as a trunking group, the 9
th
port will be
the standby port.
Configuring SNMP
The PT-7728 supports SNMP V1, V2c, and V3. SNMP V1 and SNMP V2c use a community
string match for authentication, which means that SNMP servers access all objects with read-only
or read/write permissions using the community strings
public
and
private
by default. SNMP V3
requires that you select an authentication level of MD5 or SHA, and is the most secure protocol.
You can also enable data encryption to enhance data security.
Supported SNMP security modes and levels are shown in the following table. Select the security
mode and level that will be used to communicate between the SNMP agent and manager.
Protocol
Version
UI Setting
Authentication Encryption
Method
V1, V2c
Read
Community
Community
string
No
This uses a community string
match for authentication.
SNMP V1,
V2c
V1, V2c
Write/Read
Community
Community
string
No
This uses a community string
match for authentication.
No-Auth No
No
This uses an account with admin
or user to access objects
MD5 or SHA
Authentication
based on MD5
or SHA
No
This provides authentication based
on HMAC-MD5, or HMAC-SHA
algorithms. 8-character passwords
are the minimum requirement for
authentication.
SNMP V3
MD5 or SHA
Authentication
based on MD5
or SHA
Data
encryption
key
This provides authentication based
on HMAC-MD5 or HMAC-SHA
algorithms, and data encryption
key. 8-character passwords and a
data encryption key are the
minimum requirements for
authentication .and encryption.
