NPort 5100 Series User’s Manual
Initial IP Address Configuration
3-6
Serial Console (19200, n, 8, 1)
You may use the RS-232/422/485 console port to set up the IP address for NPort 5100. We
suggest using PComm Terminal Emulator, which is available free of charge as part of the PComm
Lite program suite (found on the Software CD that comes with the product), to carry out the
installation procedure, although other similar utilities may also be used.
Before you start to configure the NPort 5100 via serial console, turn off the power and connect the
serial cable from NPort 5100 to your computer’s serial port.
1.
Connect NPort 5100’s serial port 1 directly to your computer’s male RS-232/422/485 serial
port.
2.
From the Windows desktop, click
Start
Æ
Programs
Æ
PComm Lite
Æ
Terminal
Emulator
.
3.
When the
PComm Terminal Emulator
window opens, first click on the
Port Manager
menu item and select
Open
, or simply click on the
Open
icon.
4.
The
Property
window opens automatically. From the
Communication Parameter
page,
select the appropriate COM port for the connection,
COM1
in this example, and
19200
for
Baud Rate
,
8
for
Data Bits
,
None
for
Parity
, and
1
for
Stop Bits
.
5.
From the Property window’s
Terminal
page, select
ANSI
or
VT100
for
Terminal Type
and
then click
OK
.
If you select
Dumb Terminal
as the terminal type, some of the console functions—especially
the “Monitor” function—may not work properly.
6.
Press the “ ` ” key continuously and then power on the NPort 5100.
Содержание NPort 5100 Series
Страница 1: ......
