- 9 -
ATTENTION
For Hazardous Location Use
The PoE capacity of the PWR-LV-P48 is only certified for use in
hazardous locations up to a maximum power budget of 369.6
W and a maximum output of up to 15.4 W per port.
For the PWR-HV-NP, the 110/220 VAC/VDC power supplies provide
power to the switch.
For the PWR-LV-NP, the 24/48 VDC power supplies provide power to
the switch.
Power Terminal Blocks
The connection for power input and PoE external power supply is on the
power modules.
PWR-HV-P48/PWR-HV-NP
1.
Insert the neutral/line (L/N/Ground) AC wires into the terminals.
2.
Insert the terminal block connector into the terminal block
receptor.
PWR-LV-P48/PWR-LV-NP
1.
Remove 8 to 9 mm of the DC wires’ protective cover.
2.
Use a tool to push the spring mechanism inwards to open it.
3.
Insert the negative/positive (-/+) DC wires into the terminals.
4.
Release the spring mechanism.
5.
Insert the terminal block connector prongs into the terminal block
receptor.
