ioMirror E3210 User’s Manual
ioMirrorAdmin and ioEventLog
Firmware Update
The ioMirror firmware can be updated through ioMirrorAdmin. Select the desired unit in the left
panel. In the right panel, select the
Firmware Update
tab. You may obtain the latest firmware by
visiting the MOXA website.
Restart System
You may restart any ioMirror server over the network. Right-click the desired unit in the left panel
and select
Restart System
.
Reset to Default
You may load the factory default settings for any ioMirror server on the network. Right-click the
desired unit in the left panel and select
Reset to Default
.
ioEventLog
Basic Functions
ioEventLog is installed along with ioMirrorAdmin from the Document and Software CD. It is
designed to help you keep a record of ioMirror status events over the network. The log is stored on
the Windows PC, and you will need to set up your ioMirror server to send status events to your
PC’s IP address. The following events are monitored:
y
cold start
y
warm start
y
off-line
y
on-line
For each event, the following information is provided. The log can be sorted by any of these fields:
y
event type
y
event date and time
y
ioMirror source name
y
ioMirror source IP
4-5
y
ioMirror destination IP
