ioMirror E3210 User’s Manual
Introduction
1-8
44.5
35.1
6.89
3.39
57.5
79
3.4
Hardware Overview
Please note that the LCD display module is an optional accessory.
Reset Button
– The reset button is used to load factory defaults. Use a pointed object, such as a
straightened paper clip or toothpick, to hold the reset button down for 5 seconds. The Ready LED
will turn red as the factory defaults are loaded and will change to green when the operation is
complete.
Pin Assignments
Ethernet (CN1)
Pin Signal
1 Tx+
2 Tx-
3 RX+
1
8
6 Rx-
