ioLogik R2110 Series User’s Manual
Configuring with ioAdmin
3-5
ATTENTION
If ioAdmin is unable to find your ioLogik R2110, make sure that the baudrates match. See
Chapter 2
for setting or viewing the baudrate on your ioLogik R2110.
ATTENTION
Even if ioAdmin is unable to find your ioLogik R2110, you may still access the On-line Wiring
Guide. Please refer to the
On-line Wiring Guide
section for details.
Monitoring I/O Status
Once the ioLogik R2110 is found by ioAdmin, you may monitor I/O status from the first tab of
ioAdmin. You can also configure each DI/O channel from this tab after first logging in under the
Management tab. See the
Configuring Digital Input/Output Channels
section
for more
information.
