Moxa Technologies ICF-1150 series, Быстрое руководство по установке

Страница: 10 / 11

- 10 -
Fiber Tx Green When sending serial data from the fiber port
Fiber Rx Yellow When receiving data from the fiber port
Specifications
Serial Communication
Signals for RS-232 TxD, RxD, SGND
Signals for RS-422 TxD+, TxD-, RxD+, RxD-, SGND
Signals for 4-wire RS-485 TxD+, TxD-, RxD+, RxD-, SGND
Signals for 2-wire RS-485 Data+, Data-, SGND
Baudrate 50 bps to 921.6 Kbps
ESD protection 15 kV ESD
Fiber Communication
Connector type ST or SC
Distance Single-mode fiber for 40 km
Multi-mode fiber for 5 km
Support Cable Single mode:
8.3/125, 8.7/125, 9/125 or 10/125 μm
Multi-mode:
50/125, 62.5/125, or 100/140 μm
Wavelength ICF-1150-S: 1310 nm
ICF-1150-M: 850 nm
TX Output ICF-1150-S: > -8 dBm
ICF-1150-M: > -8 dBm
RX Sensitivity ICF-1150-S: -25 dBm
ICF-1150-M: -25 dBm
Point-to-Point Transmission Half or Full duplex
Multi-drop Transmission
Half duplex, fiber ring
Environmental
Operating Temperature 0 to 60°C (32 to 140°F), 5 to 95 % RH
-40 to 85°C (-40 to 185°F) for –T Model
Storage Temperature -40 to 85°C (-40 to 185°F), 5 to 95 % RH
Power
Input Power Voltage 12 to 48 VDC, 300 mA (Max.) Class 2
Power Line Protection 4 kV Burst (EFT), EN61000-4-4
4 kV Surge, EN61000-4-5
Reverse Power Protection Protects against V+/V- reversal
Over Current Protection Protects against 2 signals shorted
together: 1.1 A
Power Consumption ICF-1150-S/M-SC/ST: 246 mA @ 12 V
ICF-1150I-S/M-SC/ST: 300 mA @ 12 V
Physical Characteristics
Dimensions (W × D × H) 30.3 × 70 × 115 mm
Material Aluminum (1 mm)
Gross Weight ICF-1150 : 118g
ICF-1150I : 135g
Regulatory Approvals
CE Class A
FCC Part 15 sub Class A
EMI EN55032, Class A
EMS EN 61000-4-2 (ESD): Contact: 8 kV; Air:
15 kV EN 61000-4-3 (RS): 80 MHz to 1
GHz: 3 V/m
EN 61000-4-4 (EFT): Power: 4 kV;
Signal: 1 kV EN 61000-4-5 (Surge):