- 9 -
“Turbo Ring” DIP Switch Settings
DIP 1
DIP 2
DIP 3
DIP 4
Reserved for
future use.
ON: Enables this
EDS as the Ring
Master.
ON: Enables the
default “Ring
Coupling” ports.
ON: Activates DIP
switches 1, 2, 3 to
configure “Turbo
Ring” settings.
OFF: This EDS
will not be the
Ring Master.
OFF: Do not use
this EDS as the
ring coupler.
OFF: DIP
switches 1, 2, 3
will be disabled.
“Turbo Ring V2” DIP Switch Settings
DIP 1
DIP 2
DIP 3
DIP 4
ON: Enables the
default “Ring
Coupling
(backup)” port.
ON: Enables this
EDS as the Ring
Master.
ON: Enables the
default “Ring
Coupling” port.
ON: Activates
DIP switches 1,
2, 3 to configure
“Turbo Ring V2”
settings.
OFF: Enables the
default “Ring
Coupling
(primary)” port.
OFF: This EDS
will not be the
Ring Master.
OFF: Do not use
this EDS as a ring
coupler.
OFF: DIP
switches 1, 2, 3
will be disabled.
NOTE
You must enable the Turbo Ring function first before using the
DIP switch to activate the Master and Coupler functions.
NOTE
If you do not enable any of the EDS-P510A-8PoE switches to be
the Ring Master, the Turbo Ring protocol will automatically
choose the EDS-P510A-8PoE with the smallest MAC address
range to be the Ring Master. If you accidentally enable more than
one EDS-P510A-8PoE to be the Ring Master, these
EDS-P510A-8PoE switches will auto-negotiate to determine
which one will be the Ring Master.
LED Indicators
The front panel of the Moxa EDS-P510A-8PoE contains several LED
indicators. The function of each LED is described in the following table:
LED
Color
State
Description
PWR1
AMBER
On
Power is being supplied to power input
P1.
Off
Power is
not
being supplied to power
input P1.
PWR2
AMBER
On
Power is being supplied to power input
P2.
Off
Power is
not
being supplied to power
input P2.
FAULT
RED
On
When a user-configured event is
triggered.
Off
When a user-configured event is not
triggered.
