- 4 -
Mounting Dimensions (unit = mm)
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the
back panel of the EDS-P510A-8PoE when you take it out of the box. If you
need to reattach the DIN-Rail attachment plate to the EDS-P510A-8PoE,
make sure the stiff metal spring is situated towards the top, as shown by
the following figures.
STEP 1
—Insert the top of the
DIN-Rail into the slot just below
the stiff metal spring.
STEP 2
—The DIN-Rail attachment
unit will snap into place as shown in
the following illustration.
To remove the EDS-P510A-8PoE from the DIN-Rail, simply reverse Steps
1 and 2 above.
