—
13
—
Auto MDI/MDI-X Connection
The Auto MDI/MDI-X function allows users to connect the EDS-505A/508A’s
10/100BaseTX ports to any kind of Ethernet device, without needing to pay
attention to the type of Ethernet cable being used for the connection. This
means that you can use either a
straight-through
cable or
cross-over
cable to
connect the EDS-505A/508A to Ethernet devices.
Fiber Ports
The fiber ports are factory-built as either multi-mode or single-mode SC/ST
connectors. Therefore, you should use fiber cables that have SC/ST connectors
at both ends. When plugging the connector into the port, make sure the slider
guide is positioned to the right side such that it fits snuggly into the port.
slider
slider guide
slider ridges
slider
slider guide
slider ridges
Specifications
Technology
Standards IEEE802.3,
802.3u,
802.3x, 802.1D, 802.1w, 802.1Q,
802.1p, 802.1X, 802.3ad
Protocols
IGMPv1/v2, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, BootP, TFTP, SNTP, SMTP, RARP,
GMRP, LACP, RMON, HTTP, HTTPS, Telnet,
Syslog, DHCP Option 66/67/82, SSH, SNMP Inform,
Modbus/TCP, LLDP, IEEE 1588 PTP, IPv6
MIB MIB-II,
Ethernet-Like MIB, P-BRIDGE MIB,
Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON
MIB Group 1,2,3,9
Forwarding and Filtering
Rate
148810 pps
Processing Type
Store and Forward
Flow Control
IEEE802.3x flow control, back pressure flow control
Interface
RJ45 Ports
10/100BaseT(X) auto negotiation speed, F/H duplex
mode, and auto MDI/MDI-X connection
Fiber Ports
100BaseFX ports (SC/ST connector)
Console RS-232
(RJ45)
LED Indicators
PWR1, PWR2, FAULT, 10/100M (TP port), 100M
(Fiber Port), MSTR/HEAD and CPLR/TAIL
SC Connector
ST Connector
