- 4 -
DIN-rail Mounting
The DIN-rail mounting kit is fixed to the back panel of the EDS device
when you take it out of the box. Mount the EDS device on corrosion-
free mounting rails that meet the EN 60715 standard.
Installation
STEP 1—
Insert the upper lip of
the DIN rail into the DIN-rail
mounting kit.
STEP 2—
Press the EDS device
towards the DIN rail until it
snaps into place.
Removal
STEP 1
—Pull down the latch on
the mounting kit with a
screwdriver.
STEP 2 & 3
—Slightly pull the
EDS device forward and lift up
to remove it from the DIN rail.
NOTE
Our DIN rail kit now utilizes a quick release mechanism to make
it easier for users to remove the DIN rail from the EDS device.