- 3 -
Connecting the Power
The DA-681A offers both single power and dual power inputs. Use a
phillips screwdriver to remove the terminal clamp screws. Connect the
power cord to the screws, and then fasten the screws to the unit. Refer to
the following figure for detailed information.
DPP and DPP-T Models
SP Models
AC Terminal
AC Terminal
DC Terminal
DC Terminal
NOTE 1.
Disconnect all power supply cords before performing
maintenance on the product.
2.
Fuses (fuse F1, F2 T6.3A, 500VAC/400VDC) should be
replaced by a qualified Moxa RMA service technician.
