- 2 -
Overview
Introduction
The CSM-G200 Series is a Gigabit Ethernet to optical fiber slide-in
media converter module and is part of the NRack System. It provides
Ethernet media conversion from 10/100/1000 BaseT(X) to 100/1000
BaseFX (SFP slot) and can be installed in every chassis of the NRack
System.
The CSM-G200 Series includes the following models:
•
CSM-G200-1221: 10/100/1000BaseT(X)-to-100/1000BaseSFP
slide-in media converter module
Installation
The CSM-G200 media converter slide-in module can be hot-swapped,
which means the chassis does not need to be powered off or removed
during installation. Align the slide-in module with the chassis
installation slot so that the panel fastener screw is at the top of the
module. Carefully slide the slide-in module into the slot while aligning
the module’s circuit board with the installation guide.
Ensure that the slide-in module is firmly seated inside the chassis. Push
in and rotate the attached panel fastener screw clockwise to secure the
module to the chassis.
Why Convert Ethernet to Fiber
Fiber communication not only extends the communication distance but
also provides many helpful features.
•
IMMUNITY FROM ELECTRICAL INTERFERENCE:
Electromagnetic interference or radio frequency interference does
not affect fiber. Thus, fiber provides a clean communication path
and is immune to cross-talk.
•
INSULATION:
Optical fiber is an insulator; the glass fiber eliminates the need for
using electric currents as the communication medium.
•
SECURITY:
Conventional electric means cannot tap fiber. Furthermore, fiber is
very difficult to tap into optically. Radio and satellite communication
signals can be captured easily for decoding.
•
RELIABILITY & MAINTENANCE:
Fiber is immune to adverse temperature and moisture conditions,
does not corrode or lose its signal, and is not affected by short
circuits, power surges, or static electricity.
