- 6 -
ATTENTION
This is a Class 1 Laser/LED product. To avoid causing serious
damage to your eyes, do not stare directly into the laser beam.
DIP Switch Settings
DIP
Function
ON (Default)
OFF
1 Force Fiber Speed
Auto
1000 Mbps
2 TP Auto Negotiation
Enable
Disable
3 Force TP Speed
1000 Mbps
100 Mbps
4 Force TP Duplex
Full-duplex
Half-duplex
5 Link Fault Pass-through
Enable
Disable
6 Operating Mode
Store-and-forward
Pass-through
7 Jumbo Frame
Disable
Enable
LED Indicators
LED
Color State
Function
PWR
Green
On
Power is being supplied to power
input.
Off
Power is not being supplied to power
input.
FAULT
Red
On
Communication failed
Blinking The device is unable to initialize
successfully
Off
Data is transferring normally
G2
Green
On
FX port’s is active.
Blinking Data is being transmitted
Off
FX port is inactive.
10/100M (TP) Yellow
On
TP port’s 10/100 Mbps is active.
Blinking
Data is being transmitted at 10/100
Mbps.
Off
TP port’s 10/100 Mbps is inactive.
1000M (TP)
Green
On
TP port’s 1000 Mbps is active.
Blinking Data is being transmitted at 100
Mbps.
Off
TP port’s 1000 Mbps is inactive.
Auto MDI/MDI-X Connection
The Auto MDI/MDI-X function allows users to connect the Moxa CSM-
G00’s 10/100/1000BaseT(X) ports to any kind of Ethernet device,
regardless of the type of Ethernet cable used for the connection. This
means that you can use either a straight-through or crossover cable to
connect the CSM-G200 to Ethernet devices.
