AirWorks AWK-4121 User’s Manual
Web Console Configuration
Load Factory Default
Use this function to reset the AWK-4121 and roll all settings back to the factory default values.
You can also reset the hardware by pressing the reset button on the top panel of the AWK-4121.
Password
You can change the administration password for each of the AWK-4121’s console managers by
using the
Password
function. Before you set up a new password, you must input the current
password and reenter the new password for confirmation. For your security, do not use the default
password
root
, and remember to change the administration password regularly.
Save Configuration
The following figure shows how the AWK-4121 stores the setting changes into volatile and
non-volatile memory. All data stored in volatile memory will disappear when the AWK-4121 is
shutdown or rebooted unless they are
y
. Because the AWK-4121 starts up and initializes with the
settings stored in flash memory, all new changes must be saved to flash memory before restarting
the AWK-4121.
This also means the new changes will not work unless you run either the
Save Configuration
function or the
Restart
function.
3-41
