- 11 -
LED Indicators
The front panel of the Moxa AWK-5232 contains several LED indicators.
The function of each LED is described in the table below.
LED
Color
State
Description
Front Panel LED Indicators (System)
PWR1
Green
On
Power is being supplied from power
input 1.
Off
Power is not being supplied from power
input 1.
PWR2
Green
On
Power is being supplied from power
input 2.
Off
Power is not being supplied from power
input 2.
PoE+
Amber
On
Power is being supplied via PoE.
Off
Power is not being supplied via PoE.
FAULT
Red
Blinking
Cannot get an IP address from the DHCP
server (interval: 1 sec)
Off
There is no error condition.
STATE
Green/
Red
Green
Software Ready.
Blinking
Green
The AWK has been located by AWK
Search Utility (interval: 1sec)
Red
Booting or Error condition.
WLAN1
Green/
Amber
Green On WLAN1 functions in Client mode.
Blinking
Green
WLAN1’s data communication is running
in Client mode.
Amber On WLAN1 functions in AP/Bridge mode.
Blinking
Amber
WLAN1’s data communication is running
in AP/Bridge mode.
Off
WLAN1 is not in use.
WLAN2
Green/
Amber
Green On WLAN2 function is in Client mode.
Blinking
Green
WLAN2’s data communication is running
in Client mode.
Amber On WLAN2 function is in AP/Bridge mode.
Blinking
Amber
WLAN2’s data communication is running
in AP/Bridge mode.
Off
WLAN2 is not in use.
TP Port (LAN1, LAN2) LED Indicators (Port Interface)
100M
Yellow
On
TP port’s 100 Mbps link is active.
Blinking Data is being transmitted at 100 Mbps
Off
TP port’s 100 Mbps link is inactive.
1000M
Green
On
TP port’s 1000 Mbps link is active.
Blinking Data is being transmitted at 1000 Mbps
Off
TP port’s 1000 Mbps link is inactive.
www.ipc2u.ru
www.moxa.pro
