Moxa Technologies AirWorks AWK-3131A Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 109

Moxa Technologies AirWorks AWK-3131A Скачать руководство пользователя страница 6

AirWorks AWK-3131A

Introduction

1-2

Overview

The AWK-3131A is 802.11n compliant to deliver speed, range, and reliability to support even the most
bandwidth-intensive applications. The 802.11n standard incorporates multiple technologies, including
Spatial Multiplexing MIMO (Multi-In, Multi-Out), 20 and 40 MHz channels, and dual bands (2.4 GHz and 5
GHz) to provide high speed wireless communication, while still being able to communicate with legacy
802.11a/b/g devices.

The AWK's operating temperature ranges from -25 to 60°C for standard models and -40 to 75°C for wide
temperature models, and is rugged enough for all types of harsh industrial environments. Installation of the
AWK is easy using DIN-Rail mounting or distribution boxes, and with its wide operating temperature range,
IP30-rated housing with LED indicators, and DIN-Rail mounting it is a convenient yet reliable solution for all
types of industrial wireless applications.

Package Checklist

Moxa’s AWK-3131A is shipped with the following items. If any of these items is missing or damaged, please
contact your customer service representative for assistance.

•

1 AWK-3131A wireless AP/client

•

2.4/5 GHz antennas: ANT-WDB-ARM-0202

•

DIN-rail kit

•

plastic RJ45 protective caps

•

Cable holder with one screw

•

Quick installation guide (printed)

•

Warranty card

NOTE

The above items come with the standard AWK-3131A model, but the package contents may vary for
customized versions.

Product Features

•

IEEE 802.11a/b/g/n compliant

•

Advanced wireless security



64-bit and 128-bit WEP/WPA/WPA2



SSID Hiding/IEEE 802.1X/RADIUS



Packet access control & filtering

•

STP/RSTP support for network system redundancy

•

Long-distance transmission support (5 GHz channel only)

•

Turbo Roaming enables rapid handover (Client mode)

•

AeroLink Protection supported for redundant wireless communication

•

ABC-01 for configuration import/export

•

RS-232 console management

•

2DI+1DO for on-site monitoring and warnings

•

Wide -40 to 75°C operating temperature range (-T model)

•

Redundant 12 to 48 VDC power inputs or IEEE 802.3af Power over Ethernet

•

DIN-Rail or wall mounting

•

IP30 protected high-strength metal housing

NOTE

The latest specifications for Moxa’s products can be found at

https://www.moxa.com

«
...
4
5
6
7
8
...
»

Содержание AirWorks AWK-3131A














































































































Отзывы:

Нет отзывов