Movement TOURS, Руководство пользователя

Страница: 71 / 164

ASSEMBLING THE EQUIPMENT
16
CAUTION!
Before starting the installation of the equipment, it is necessary to pay
attention to the following precautions:
•Make sure that the packaging is not damaged and that the parts and
components of the equipment are not defective.
•It is recommended that the equipment be unpacked at the place where it will
be assembled.
•The assembly area should be clean.
•The floor must be flat and level to prevent equipment instability.
•The space around the equipment should be clear, as described in this Manual
(see Operational Instructions Chapter).
•It is recommended that the equipment be mounted away from moisture and
away from sunlight in order to avoid damaging the electronic parts of the
equipment.
• Be sure to lift all parts included in the boxes. Check the component list for a
complete count of the number of parts included for correct assembly.
•The purpose of the icons is to instruct the user on which tool to use, how
many people to assemble or to tighten the screws in a given step.
In order to assemble the equipment, the following tools are needed:
TOOLS
Allen
M5
M6
Philips
wrench
Fixed
wrench
Screw threader
medium torque
91 cm
91 cm
91 cm
91 cm
SPACER
We recommend that for the safety of the
users the equipment be used in an area that
is not frequently used based on the figure to
the side. The access and exit area can be
common between the oars used.
TABLE OF SPECIFICATION OF SCREW
TIGHTWINING TORQUE
Diameter [mm]
M6
Torque [N.m]
9-12
M8 22-29
M10 45-58
ICONS
50%
100%
Don
’
t fully tighten
the bolts
Fully tighten
the screws
Assembly by two
people is
recommended